THE COLLECTIONS of WEHRMACHT

2014年10月26日星期日

Patronentaschen für k98

此為早期版的彈包，顏色為黑色，由22片皮革組成。

另外也有咖啡色版的。1943年規定彈包都要塗成黑色,因此可以看見許多正面黑色，背面爲咖啡色的彈包（物主自行塗的）

This is a pre/early war style black paint k98 pouch.Made of 22 pieces of leathers.

There were also brown/tan color models .In 1943,all pouches were ordered to paint in black ,so you can see some pouches have black paint at the front but brown color on backside (field-painted)

正面

Front

背面

Back

上面

鵝卵石紋的皮革

Above

"stone wall" pattern leather

固定帶早/中期以縫線接合，後期以鉚釘接合。

The straps were sewn together with sutures in early/mid war.Late war models were connected with rivets.

底部以三層皮縫製

The tab was made of 3 pieces leathers.

單一個彈包可裝10發子彈，三個共有30發的容量。

內部可見一皮質支撐條防止彈包變形。

Each compartment hold 2 five-round clips making a total 30 rounds.

Inside the compartment is a devider to keep the compartment from being out of shape.

中間鋁質螺柱的形狀與其他兩個不同

Aluminum studs,notice that the middle stud's shape is different then the others.

"開放式"固定帶。中後期改成封閉式的。

Open style belt loop,the end will fold under the bottom to secure with the belt.

Mid/late models used close style belt loop

鋁質D環，可和Y帶或背包的鉤子結合。

Aluminium D-ring can be hitched with Y-Riemem or Tornister's hook.

中間可看到製造廠名、廠址及生產年份之打印：

Gehr . Hast

Dresden 1939

Manufacturer name,location,and date can be seen on the middle.

Gehr . Hast

Dresden 1939

與皮帶結合

Wear on belt

2014年10月25日星期六

Kochgeschirr Modell 1931

此為早期feldgrau塗裝的便當盒。

1941年陸軍條例第435號規定1941年4月後所有便當盒以橄欖綠塗裝（不過每家工廠的顏色會稍有不同，也有一些廠在1941年後還是以feldgrau塗裝）

This is an early war fieldgray paint mess tin.

Orderd to HM 41, NO435.all mess tin had to paint in olivergreen after April 1941（However,every manufacturer's paint was little different ,and some still used fieldgray after 1941.)

正面

容量為1.7公升

Front

1.7 Liters

背面

Back

早期為鋁質，中後期大多改為鐵製。上面有3條0.5公升的刻印,內側也可看到刻印。

Pre/early war productions are made of Aluminium.However,many of mid/late war models were made of steel.

Visible are the markings which show 0.5 Liters,these markings can also be seen inside the mess tin.

內側

Inside

上部邊緣細節

由裡向外翻後再壓實

detail

The edge has a rolled edged

提把處構造，提把與提把座皆為鋁製。

後者中後期大多以一片鐵片製成

Detail of the Aluminium bail lug for the wire handle,the wire handle is made of Aluminium ,too.

Many mid/late models' bail lugs were made of one piece steel.

內側（鉚釘接合處十分平滑）

Inside

The joints of the rivets are smooth.

通常廠記及年份打印在其中一側。

HWSD 40

manufacturer and date are usually stamped on one of the bail lugs.

HWSD 40

底部與內側

Bottom and Inside

蓋子的把手展開後可至90度。

The cover and the handle can stay an angle of 90 degrees when turn upside down.

蓋子邊緣之滾邊。

The rolling side of the cover .

1939年前的把手為鋁製，1940年後改為鐵製。

Pre 1939's handle were made of Aluminium,after 1940 were steel.

工廠代碼及年份打印打在把手中間處。

manufacturer code and date can be seen on the middle of the handle.

內側

Inside

Feldflasche Modell 1931

此為早期的水壺，皮件為咖啡色。

並非只有空軍皮件是咖啡色，許多早期/戰前的也是咖啡/皮革原色。不過已知空軍用的是打印"LBA"(Luftwaffebekleidugsamt)。

Pre/early war common style canteen with brown straps.This is not Luftwaffe issued canteen because there's no L.B.A (Luftwaffebekleidungsamt)mark on its strap.

In fact,not only Luftwaffe but many pre/early war canteens have brown/tan straps.

正面

0.8公升容量

Front

0.8 Liters